{"product_id":"928-druklager-revisie","title":"Porsche 928 clutch release bearing replacement part 1977-1986 | 92811608524","description":"\u003ch1\u003ePorsche 928 release bearing rebuild kit 1977–1986 | 92811608524\u003c\/h1\u003e\n\u003cp\u003eThe original release bearing for the 1977–1986 manual Porsche 928 is becoming increasingly difficult to find. This rebuild kit allows the existing release bearing to be rebuilt without replacing the original release bearing housing.\u003c\/p\u003e\n\u003cp\u003eThe kit consists of \u003cstrong\u003eone new bearing with a new matching bushing\u003c\/strong\u003e. The old bearing is removed from the original housing. The new bearing and bushing are then installed.\u003c\/p\u003e\n\u003cp\u003eThis rebuild kit is suitable for the Porsche 928 with a \u003cstrong\u003e4.5, 4.7, and 5.0 engine\u003c\/strong\u003e, manual transmission, and the original \u003cstrong\u003edual-plate clutch\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eSuitable for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e Porsche 928\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eModel years:\u003c\/strong\u003e 1977-1986\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEngine:\u003c\/strong\u003e 4.5, 4.7, and 5.0\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTransmission:\u003c\/strong\u003e manual\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClutch:\u003c\/strong\u003e original dual-plate clutch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity per car:\u003c\/strong\u003e 1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e automatic transmission\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Porsche 928 from model year 1987 onward with the later clutch type\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eReplaces part number\u003c\/h2\u003e\n\u003cp\u003eThis rebuild kit is suitable as a replacement solution for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e92811608524\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e92811608525\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e92811608519\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e92811608516\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlternative notation of the main part number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e928 116 085 24\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e928.116.085.24\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant fitment information\u003c\/h2\u003e\n\u003cp\u003eThis kit is intended exclusively for the 1977–1986 manual Porsche 928 with the original dual-plate clutch.\u003c\/p\u003e\n\u003cp\u003eThis product is not a completely new release bearing including a new housing. The original Porsche release bearing housing is reused.\u003c\/p\u003e\n\u003cp\u003eThe old bearing is removed from this housing. The new bearing and bushing are then installed.\u003c\/p\u003e\n\u003cp\u003eThe original housing can be reused. However, check it for damage or excessive wear during the rebuild.\u003c\/p\u003e\n\u003cp\u003eFrom model year 1987 onward, the Porsche 928 uses a different type of clutch and release bearing. This rebuild kit is not suitable for these later models.\u003c\/p\u003e\n\u003ch2\u003eBenefits of this product\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNew bearing and new bushing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSpecifically for the 1977–1986 Porsche 928\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for the 4.5, 4.7, and 5.0 engines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor manual transmission models\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSpecifically for the original dual-plate clutch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOriginal release bearing housing can be reused\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSolution for hard-to-obtain original release bearings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for clutch maintenance and complete refurbishment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstallation video available\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable as a replacement for several original Porsche part numbers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen should this part be replaced?\u003c\/h2\u003e\n\u003cp\u003eThe release bearing is subjected to load when the clutch is operated. Due to age, wear, and prolonged use, the bearing may begin to rotate roughly or develop play.\u003c\/p\u003e\n\u003cp\u003eCheck the release bearing for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSqueaking or whistling noise when operating the clutch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGrinding or rattling noise when pressing the clutch pedal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA bearing that rotates heavily or unevenly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNoticeable play in the bearing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVisible damage or wear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisassembling the clutch for maintenance or refurbishment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA noise when operating the clutch is not always caused by the release bearing. Therefore, also check the other clutch components and the release mechanism.\u003c\/p\u003e\n\u003ch2\u003eInstallation information\u003c\/h2\u003e\n\u003cp\u003eThe release bearing is located at the clutch and is part of the release mechanism.\u003c\/p\u003e\n\u003cp\u003eWith this refurbishment, the original release bearing housing is retained.\u003c\/p\u003e\n\u003cp\u003eThe existing bearing must be removed from the housing. The new bearing and bushing are then installed.\u003c\/p\u003e\n\u003cp\u003ePay attention to the following points during installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCarefully clean the original release bearing housing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the housing for damage and excessive wear.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the release mechanism for wear.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the other clutch components when the clutch is disassembled.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the new bearing and bushing straight and correctly in the housing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAfter installation, check that the release bearing can move freely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrevent oil or grease from coming into contact with the clutch friction surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNo clips, rings, or other mounting materials\u003c\/strong\u003e are included.\u003c\/p\u003e\n\u003cp\u003eA fitting video is available on the product page, explaining how to remove the old bearing and install the new bearing.\u003c\/p\u003e\n\u003ch2\u003eTechnical details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e release bearing rebuild set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Porsche 928 clutch release bearing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Porsche 928\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eModel years:\u003c\/strong\u003e 1977-1986\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEngines:\u003c\/strong\u003e 4.5, 4.7, and 5.0\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTransmission:\u003c\/strong\u003e manual\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClutch:\u003c\/strong\u003e dual-plate clutch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation position:\u003c\/strong\u003e clutch \/ clutch housing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e new\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePart numbers:\u003c\/strong\u003e 92811608524, 92811608525, 92811608519, 92811608516\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet contents:\u003c\/strong\u003e 1 new bearing and 1 new bushing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eReuse:\u003c\/strong\u003e original release bearing housing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e clips, rings, and other installation materials\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this rebuild set fit all Porsche 928 models from 1977–1986?\u003c\/h3\u003e\n\u003cp\u003eThe set is suitable for the manual Porsche 928 from 1977–1986 with the original dual-plate clutch. This applies to the 4.5, 4.7, and 5.0 engines.\u003c\/p\u003e\n\u003ch3\u003eDoes this set fit an automatic Porsche 928?\u003c\/h3\u003e\n\u003cp\u003eNo. This rebuild set is intended exclusively for manual-transmission models.\u003c\/p\u003e\n\u003ch3\u003eDoes this set fit a Porsche 928 from 1987 onward?\u003c\/h3\u003e\n\u003cp\u003eNo. From model year 1987 onward, the Porsche 928 uses a different type of clutch and release bearing.\u003c\/p\u003e\n\u003ch3\u003eIs a complete release bearing with housing supplied?\u003c\/h3\u003e\n\u003cp\u003eNo. The original Porsche release bearing housing is reused. You will receive a new bearing and a new bushing.\u003c\/p\u003e\n\u003ch3\u003eWhich part numbers does this rebuild set replace?\u003c\/h3\u003e\n\u003cp\u003eThe rebuild set is suitable for release bearings with part numbers \u003cstrong\u003e92811608524, 92811608525, 92811608519 and 92811608516\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eCan the original release bearing housing be reused?\u003c\/h3\u003e\n\u003cp\u003eYes. The set is specifically intended to reuse the original housing. However, inspect the housing for damage and excessive wear during the rebuild.\u003c\/p\u003e\n\u003ch3\u003eAre clips and rings included?\u003c\/h3\u003e\n\u003cp\u003eNo. The set consists exclusively of \u003cstrong\u003eone new bearing and one new bushing\u003c\/strong\u003e. Clips, rings, and other installation materials are not included.\u003c\/p\u003e\n\u003ch3\u003eIs an installation guide available?\u003c\/h3\u003e\n\u003cp\u003eThe product page includes an installation video explaining how to remove the old bearing and install the new bearing and bushing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"928-944parts","offers":[{"title":"Default Title","offer_id":56970865672532,"sku":"L1242","price":225.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/7628\/9442\/files\/WhatsAppImage2026-08-30at16.33.15_1.jpg?v=1788103717","url":"https:\/\/928-944parts.com\/en\/products\/928-druklager-revisie","provider":"928-944parts","version":"1.0","type":"link"}