Porsche 944 rear axle support mount set left and right 924 / 944 / 968 | 94433107500

New rear axle support mount set left and right for the Porsche 924, 944 and 968. These parts are also known as rear axle support bearings, rear axle support mounts or rear axle support mounts.

These support bearings are located on the rear axle assembly and form the connection between the rear axle / trailing arm mounting and the body. The original rubber components on many cars are now several decades old and are still the original factory-fitted parts. Due to age, load and corrosion, the rubber can dry out, crack or develop play.

A worn rear axle mount can result in less precise handling, noises from the rear axle and changing wheel alignment under load. When rebuilding the rear axle or rear suspension, it is therefore advisable to replace both sides at the same time so that the car handles precisely afterwards.  

This set therefore includes the left and right support for the rear axle mounting.

Suitable for

• Model: Porsche 924, 924S, 944 and 968

• Mounting side: left and right

• Application: rear axle / rear suspension

• Design: rubber-metal support bearing for the rear axle mounting

• Set contents: left support + right support

Replaces part number

• Left side: 94433107500, 944 331 075 00

• Successor / alternative number left: 94433107501, 944 331 075 01

• Alternative number left: 477501075A, 477 501 075 A

• Right side: 94433107600, 944 331 076 00

• Successor / alternative number right: 94433107601, 944 331 076 01

Important fitment information

This set is intended for the left and right rear axle mounting. 

The left support bearing is often associated with the numbers 94433107500 and 94433107501. The right support bearing is often associated with the numbers 94433107600 and 94433107601.

Some suppliers use older and newer numbers interchangeably. If in doubt, check the number on the old part or compare the shape of the left and right supports with the product photos.

Preferably replace both sides at the same time. If one support bearing is worn, the other side is often also aged. Replace them together.

Benefits of this product

• Complete set for left and right

• Suitable for Porsche 924, 944 and 968

• Replaces the original rear axle supports

• Important part when rebuilding the rear axle

• Helps reduce play in the rear suspension

• Can contribute to more precise and stable handling

• Suitable for knocking noises or worn rear axle mounts

• Good replacement for old, dried-out or cracked rubber components

• Important for a correct and stable rear axle position

When should this part be replaced?

The original rear axle mounts are often old and heavily loaded. Due to age, dirt, moisture and movement in the rear suspension, the rubber can become damaged or detach from the metal part because of rust.

Replacement is advisable when these symptoms occur:

• Play in the rear axle or rear suspension

• Knocking or tapping noise at the rear of the car

• Cracks in the rubber

• Dried-out or porous rubber

• Corrosion around the support bearings

• Unstable handling at the rear

• Changing wheel alignment under load

• Alignment problems due to play in the rear axle

• Rebuilding the rear axle or torsion bar assembly

Pay particular attention to this part on older Porsche 924, 944 and 968 models. The rubber components are often still original and may lose their effectiveness after several decades.

Installation information

The rear axle mounts are located at the rear axle mounting on the body. They form part of the rear axle / trailing arm assembly.

Installation usually requires more work than simply replacing a separate rubber component. The rear axle assembly must be properly supported, and the position of the rear axle must be checked after installation.

After installation, it is advisable to check the rear axle and wheel alignment. Work on these rubber components can affect the alignment.

During a complete rear axle rebuild, also replace other rubber components and mounting parts that show wear or corrosion.

Technical details

• Product: rear axle mounts / rear axle support bearings

• Application: Porsche 924, 944 and 968

• Position: rear axle mounting

• Mounting side: left and right

• Suitable for: Porsche 924, 924S, 944, 944 Turbo, 944 S, 944 S2 and 968

• Model years: depending on model and specification

• Condition: new part

• Left side: 94433107500 / 94433107501 / 477501075A

• Right side: 94433107600 / 94433107601

• Set contents: 1 left support bearing and 1 right support bearing

Frequently asked questions

Does this set fit all Porsche 944 models?

This set is used for many Porsche 944 models. However, always check the vehicle specification and compare the parts with the old rear axle supports.

Does this set also fit the Porsche 924 and 968?

Yes, this type of support bearing is also used on Porsche 924 and 968 models. However, always check the part number and vehicle specification.

Is this a set for left and right?

Yes. This set contains the left and right support for the rear axle mounting.

Is 94433107500 the same as 94433107501?

94433107500 is often listed as an old or alternative number. 94433107501 is often listed as a newer or alternative version. If in doubt, check the number on the old part.

What is the difference between 94433107500 and 94433107600?

94433107500 is for the left side. 94433107600 is for the right side. The left and right supports are therefore not the same part.

How can I recognize worn rear axle mounts?

Worn rear axle mounts can cause play, knocking noises, cracks in the rubber or unstable handling. The rear wheel alignment can also change under load.

Does the car need to be aligned after installation?

Yes, this is advisable. Work on the rear axle mounts can change the position of the rear axle or wheel alignment. Therefore, always check the alignment after installation.

Can I install this set myself?

You can, but removal is not always straightforward. The rear axle must be properly supported, and the mounting may be seized due to age or corrosion. For many customers, installation by an experienced mechanic is recommended.