This is a redesign of the original Crank position sensor bracket with improved functionality.
For correctly mounting the Speed & Reference sensor
When you change a clutch or need to remove the engine, this can be a nightmare. You can easily spend an hour on this to get it out. The tight space makes it a frustrating job. So we have a time saver for you.
Break & snap off the original old sensor bracket. In 5 seconds your problem is solved.
This new sensor bracket has several advantages over the old one:
- Easily adjust the correct clearance with the bolt
- Adjust the clearance using a test light procedure since this bracket is non-conductive
- Sensors will come out easily
- Mounting can be done with a 10mm wrench instead of an Allen bolt
- We removed the third TDC sensor holder as it has no use
For the turbo models, you can still use the small ring to lift the sensor (due to the slightly larger starter ring gear)
Fitting models:
924 S 2.5 1986-88
944 2.5/2.7
944 S/S2
944 turbo
Original part number: 94410132107, 9441013210
Speed sensor
Sensor bracket
