Porsche 944 Turbo/S2 turn signal housing L/R | 95163142100 / 95163142200

New front turn signal housing for the Porsche 944 Turbo and Porsche 944 S2. This housing has been completely redesigned as a replacement for the outdated original turn signal unit.

After decades, problems often develop with the original housing. The mounting screws may seize due to corrosion and break off during removal. The original bulb socket may also corrode, and the reflective surface may lose its effectiveness.

This new version features a modern bulb socket. The housing can be used on both the left and right sides and is supplied with a new bulb.

Suitable for

• Model: Porsche 944

• Version: Porsche 944 Turbo - all model years

• Version: Porsche 944 Turbo S

• Version: Porsche 944 Turbo Cabriolet

• Version: Porsche 944 S2

• Mounting position: Front

• Side: Left and right

• Condition: New

Not suitable for the standard Porsche 944 and Porsche 944 S with the standard front bumper.

Replaces part numbers

This housing replaces the housing of the original left and right turn signal units.

• OEM number left: 95163142100

• OEM number right: 95163142200

• Replacement number left: 95163141100

• Replacement number right: 95163141200

• Alternative format: 951 631 421 00

• Alternative format: 951 631 422 00

• Alternative format: 951 631 411 00

• Alternative format: 951 631 412 00

One new housing can be used on both the left and right sides.

Important fitment information

The original Porsche turn signal units are different on the left and right. This newly designed housing, however, is suitable for both sides of the car.

Therefore, a separate left or right housing is not required.

The housing is specifically intended for the front bumper of the Porsche 944 Turbo, Turbo S, Turbo Cabriolet, and Porsche 944 S2.

The original electrical connector is reused. The original plug with a short section of cable must be transferred from the old unit to the new housing.

Product benefits

• Completely redesigned turn signal housing

• Suitable for all Porsche 944 Turbo versions

• Suitable for the Porsche 944 Turbo Cabriolet

• Suitable for the Porsche 944 S2

• One version for both left and right

• Modern bulb socket

• Includes a new bulb

• Replaces an often-corroded original part

• Solution for damaged or broken mounting points

• Suitable for restoration and long-term maintenance

• Newly manufactured Premium Line part

When should this part be replaced?

Replacement is recommended when:

• the original bulb socket is corroded;

• the mounting screws are rusted in place or broken;

• the original housing is damaged;

• the reflective surface is deteriorated;

• the bulb no longer stays properly in the socket;

• the turn signal unit is being restored;

• the original housing can no longer be repaired reliably.

During removal of an old Porsche 944 Turbo/S2 turn signal unit, the mounting components may break due to corrosion. Therefore, carefully inspect the complete unit during removal.

Installation information

The turn signal housing is located in the front bumper of the Porsche 944 Turbo and Porsche 944 S2.

Remove the old unit carefully. The original electrical connector is reused. To do this, transfer the original plug together with a short section of cable from the old housing to the new unit.

During installation, check:

• the condition of the original connector;

• the electrical wiring;

• the mounting points;

• the seal and connection of the turn signal unit.

The new housing can be installed on either the left or right side.

Technical details

• Product: Front turn signal housing

• Application: Porsche 944 Turbo / Turbo S / Turbo Cabriolet / S2

• Position: Front

• Side: Left and right

• Condition: New

• OEM reference left: 95163142100

• OEM reference right: 95163142200

• Replacement number left: 95163141100

• Replacement number right: 95163141200

• Electrical connection: Reuse the original connector with a section of cable

• Package contents: 1 turn signal housing + 1 new bulb

• Product code: L1211

• Product line: Premium Line

Frequently asked questions

Does this housing fit both the left and right sides?

Yes. The newly designed housing can be used on both the left and right sides.

Does this housing fit all Porsche 944 Turbo models?

Yes. The housing is suitable for all Porsche 944 Turbo versions, including the Turbo S and Turbo Cabriolet.

Does this turn signal housing fit a Porsche 944 S2?

Yes. The housing is also suitable for the Porsche 944 S2.

Does this turn signal housing fit a standard Porsche 944?

No. This version is intended for the front bumper of the Porsche 944 Turbo and Porsche 944 S2.

Which part numbers does this housing replace?

The main reference numbers are 95163142100, 95163142200, 95163141100, and 95163141200.

Does the original plug need to be transferred?

Yes. The original plug with a short section of cable is transferred from the old turn signal unit to the new housing.

Is a bulb included?

Yes. The turn signal housing is supplied with a new bulb.

Why does the original turn signal housing often need to be replaced?

On old units, the mounting screws may rust in place and break. The bulb socket and reflective surface may also be affected by age and corrosion.