Porsche 924 / 944 left or right tail light
New tail light for the Porsche 924 and Porsche 944, including the 924S, 924 Turbo, 944S, 944 Turbo, and 944 S2. This high-quality reproduction replaces the original tail light and is available for both the left and right sides.
After decades, many original Porsche 924 and 944 tail lights have discolored, become dull, or been damaged. Cracks in the plastic and weathered surfaces can significantly detract from the appearance of the rear end.
These new tail lights are virtually identical to the original Porsche tail lights. The design and appearance closely match the original design, with only minor differences.
The tail lights are produced in Europe, feature an E-mark, and are supplied with mounting hardware. Ideal for a restoration or for replacing a damaged tail light.
Suitable for
-
Porsche 924: 1976-1985
-
Porsche 924 Turbo: 1979-1982
-
Porsche 924S: 1986-1988
-
Porsche 944 2.5: 1982-1989
-
Porsche 944 2.7: 1989
-
Porsche 944S: 1987-1988
-
Porsche 944 Turbo: 1985-1991
-
Porsche 944 S2: 1989-1991
Suitable for both left-hand-drive and right-hand-drive versions (LHD and RHD).
Replaces part number
-
Left: 477945205
-
Right: 477945206
Alternative formats:
Important fitment information
The tail lights are available in two versions:
The side is always determined from the vehicle's direction of travel.
The left and right versions are not interchangeable.
The product consists of the colored tail light lens with a partial housing. It is not a complete tail light unit with all electrical components.
Select the desired side when ordering: left or right.
Benefits of this product
-
Virtually original appearance: Closely matches the original Porsche design.
-
New part: Replaces old, discolored, or damaged tail lights.
-
E-mark: Approved for use on public roads.
-
European production: Manufactured in the European Union.
-
Good fit: Developed for the Porsche 924 and 944.
-
Mounting hardware included: Supplied for installation.
-
Suitable for restoration: Restores the appearance of the rear end.
-
Available left and right: Choose the desired version separately.
When should you replace the tail light?
The original tail lights of the Porsche 924 and 944 are now several decades old.
Common problems include:
-
Discoloration caused by sunlight and aging.
-
Dull or weathered plastic surfaces.
-
Cracks around mounting points.
-
Damage or cracks in the lens.
-
Moisture problems caused by damage or poor sealing.
New tail lights improve the appearance of the vehicle and replace damaged or worn parts.
Installation information
The tail lights are mounted on the left and right sides of the rear end.
When replacing the tail light, we recommend:
-
Check the existing electrical connections.
-
Check the condition of the seal.
-
Clean the mounting surfaces.
-
Check the mounting points for damage.
-
Install the tail light without applying excessive stress to the plastic.
-
Check all lighting functions after installation.
The existing electrical components must be transferred where they are not included with the new tail light.
Technical details
-
Product: Tail light with partial housing
-
Brand: partworks
-
Application: Porsche 924 / 944
-
Model years: 1976-1991, depending on version
-
Position: Left or right
-
Condition: New
-
Lens material: Plastic
-
Version: Reproduction in virtually original style
-
Production: European Union
-
Approval: E-mark
-
OEM left: 477945205
-
OEM right: 477945206
-
Set contents: 1 tail light for the selected side, including mounting hardware
Frequently asked questions
Are these tail lights the same as the original Porsche tail lights?
They are new reproductions that are virtually identical to the original Porsche tail lights in terms of design and appearance. There are minor differences compared with the original.
Do these tail lights also fit a Porsche 944 Turbo or 944 S2?
Yes, the tail lights are also suitable for the Porsche 944 Turbo and 944 S2.
Do the tail lights feature an E-mark?
Yes, both the left and right versions have an E-mark and are approved for use on public roads.
Are both tail lights supplied?
No, you order one tail light at a time. Select the left or right version when ordering.
Is mounting hardware included?
Yes, the required mounting hardware is included. During installation, also check the condition of the existing seal and electrical components.
Are these complete tail light units?
No, the product consists of a tail light lens with a partial housing. It is not supplied as a complete unit with all electrical components.
Can I replace the tail light myself?
Yes, replacement is possible with suitable tools and some technical experience. During installation, check the mounting, seal, and electrical connections.
