How wonderful when everything works again and the tank indicates full again. In the older foils such as 1982, problems can occur that cause and mul...

Porsche 928 S4 Fuel rail cover Redesign from 928-944parts StrongFlexibleNot a 3D printReal black 92811001700

Porsche 928 Bottle opener bottle opener After a big job on your Porsche 928, sometimes it's nice to treat yourself to a nice beer. Now you can do s...

Replace your fuel dampers and pressure regulators on time for optimal performance and safety. It often comes unexpectedly, but it happens: a defect...

Replace your fuel mufflers and pressure regulators on time for optimal performance and safety. It often comes unexpectedly, but it happens: a defec...

Designed for tighter shifting.  The original bushings have a few millimeters of play even when new. We have therefore redesigned these. The plastic...

Nicer than original, not painted but with a scratch-resistant layer of powder coating All years have the same rod

Porsche 928 fog lamp housing When restoring your 928, it turns out that the housing of your fog lamp cannot be removed from the bolt. Only solution...

Tensioner bushing Porsche 928 '85-'95 (S3-S4-GT-GTS)Shoulder bolt bushing New bushings for the timing belt tensioner. When renewing the distributio...

Porsche 928 Center console Since this part is NLA from Porsche and very hard to find as used part we decided to make a 3D scan and a reprint. After...

PORSCHE + 928S Sticker for the rear bumper of the Porsche 928S. This sticker has a good fit.  

After many tests with different led lights we now have a very good replacement for the old bulbs. Very good dimmable These led bulbs don't get too ...

Towing contacts horn 944 1985.5-1988: 5950 944 1989-1992: 928.652.104.00 928: 5950 964: 964.652.104.00 968: 928.652.104.00 993: 964.652.104.00

If you want to convert to a modern injection ecu you can delete the original MAF sensor. We designed it for you and have it 3D printed in strong & ...

We reproduced this part since it went NLA from Porsche. At an unbeatable price, you will never find again. Clutch thrust bearingClutch release bear...

For converting the early 928 equipped with the K-jetronics we have developed this 36-2 triggerwheel kit with a crank sensor. This is the first step...

This item can break due to oil and age. Better replace it before you have these parts in your engine. NLA from Porsche. 92810773101 (S3 & S4)

We have the tools for unbolting the pressure sensors. Fitment is very good. You can buy A or B or both, just what you want. A = 00072192740 B = 000...

Power steering hoses can leak when the rubber gets old. This is a repairkit for the very expensive power steering return hoses on the Porsche 928. ...

Has your bottom plate (belly pan) broken supports? We see them often in our workshop. So we decided to make an easy and strong fix for that. That ...

The fan for cooling the engine has two ball bearings. These are worn out after 40 years. The bearings can be replaced and with that it will run nic...

Suitable for both automatic and manual transmission! With oil cooler for both Engine & Automatic gearbox. This aluminum radiator is high quality an...

The hirschmann antenna is still popular. The antennas are very robust and a few parts are still available. But they are rare. Universal antennas j...

We are very happy to have these Unique car Poster from Australia in our warehouse for you. All models including very rare models are described with...

All-new pressure damper, alternatively nice product at a neat price. Fits right away, quick installation. This muffler is on the front of the engin...

Porsche 944 shift lever Completely reupholstered in good quality genuine leather and with our newly designed shift knob with bright white numbers. ...

The most common cause of fire in a 944 is due to the main fuel line leaking on a hot exhaust. This main line is aging and will crack, leakage can h...

Upgrade your Porsche with the new MAF Enhanced Performance for 924S, 944 Models (non turbo only) Benefits, (sorry I can't be short on this): Bette...

944 Dynamo pulley aluminum Benefits: New design, anodized in black Saves weight Replace your old rusted pulley wheel Is prepared for our triggerwh...

Porsche 944 Connector For an ECU conversion.This connector is exactly the same as the Bosch ECU connector found in any 924S or 944. It is also in t...

This part may break due to age. Original not available. New design which is much stronger due to different construction including lid Mounting w...

Targa roof problem solved If your targa roof no longer opens or closes properly, this part may be broken. On the first type 944 and also the 924, t...

Porsche 944S & S2 cam cover , Toothed Belt Cover Stronger Lighter (set =600 gr lighter) Cheaper Easy to replace when doing a timing belt job Orig...

Upgrade Your Porsche with the MAF & REMAP-Kit Enhanced Performance for 924S, 944 Models (non turbo only) Transform your driving experience with thi...

This is a very complete kit to upgrade your Porsche 944 turbo to the level it was actually designed for. For some reason Porsche decided to tune th...

944/924S Crankshaft - Flywheel lock key

After many tests with different led lights we now have a very good replacement for the old bulbs. Very good dimmable These led bulbs don't get too ...

Towing contacts horn 944 1985.5-1988: 5950 944 1989-1992: 928.652.104.00 928: 5950 964: 964.652.104.00 968: 928.652.104.00 993: 964.652.104.00

Air conditioning condenser for PORSCHE 944 from '86- 968 air conditioning system After a long time NLA, it is now again available   Reference numbe...

LMM delete tube for Turbo 3D laser printed, very strong tube (2.5mm thick) to directly replace the original LMM in case you are upgrading to an aft...

Delete the airflow meter with our LMM delete tube NA (non turbo). 3D laser printed, very strong tube (2.5mm thick) to directly replace the original...

Floor mats set new.Please see old mat for comparison. These are really nice thick mats, lie tight and do not slide.No inscriptions

Completely in style with the original interior design. This cup holder is a beautiful replacement for the old ashtray in your Porsche 944/968. Cup ...

This is a redesign of the original Crank position sensor bracket with better functionality.  For mounting the Speed & Reference sensor correctly Wh...

So here it is, a perfect reproduction of the original. polished to deep black and white painted so you won't miss a shift. We have seen some other ...

This turbo from Evergreen is the perfect upgrade for your K26. This goes beyond the K27-8 from the Turbo S.  Mounting is easy since it uses the tur...

We are very happy to have these Unique car Poster from Australia in our warehouse for you. All models including very rare models are described with...

Completely redesigned and 3D laser printed with carbon. Very strong and does not rust like the old ones do.  No longer available from Porsche (NLA)...

Fully developed on the roller bench, for any 944 8V 2.5L from 1985 onwards. We felt it was time to give the 944 a modernization and have comple...

Easiest Crank Sensor for 944 The current computer (DME / ECU / EMS) in your Porsche has its limitations. They break down and repair is not always p...